Aquacheck Silver 7-In-1 Test Strip 100 Count

$22.99

Shipping calculated at checkout.

Quantity

AquaChek Silver is the most comprehensive test strip product in our professional line providing test results for 7 key parameters in less than one minute. Save time, save money and service more pools with Fast, Easy, Accurate AquaChek Silver Test Strips.

Dip a strip into water and remove immediately.
Hold strip level for 15 seconds (do not shake excess water from strip).
Compare Total Hardness, Total Chlorine, Total Bromine, Free Chlorine, pH, Total Alkalinity and Cyanuric Acid pads (in that order) to the color chart on label.

For best results on Cyanuric Acid test, pH should be between 7.0 - 8.4 and Total Alkalinity should be at or below 240 ppm.

Pickup available at Shop location

Usually ready in 2 hours

Detail
Specs

Detail

Dip a strip into water and remove immediately.
Hold strip level for 15 seconds (do not shake excess water from strip).
Compare Total Hardness, Total Chlorine, Total Bromine, Free Chlorine, pH, Total Alkalinity and Cyanuric Acid pads (in that order) to the color chart on label.

For best results on Cyanuric Acid test, pH should be between 7.0 - 8.4 and Total Alkalinity should be at or below 240 ppm.

Specs

BTUs	T115
80/80/80	112,000
80/80/63	106,000
80/50/63	74,000
Coefficient of Performance
80/80/80	5.6
80/80/63	5.4
80/50/63	4.0
Refrigerant	R410A
Heat Exchanger	ThermoLink®
Electrical
kW Input	5.9
Voltage/Hz/Phase	208-230/60/1
Minimum Circuit Ampacity	38.2
Maximum Fuse Size	60
*Over Temperature Alarm Kit available: part number STK0221 for single phase, STK0222 for three phase. Strongly recommended for all spa applications.
Water Flow
Minimum/Maximum (gpm)	30/70
*A Heater Bypass Kit is required when flow rates exceed the maximum: part number STK0135.
Physical
Weight (lbs)	261
Length x Width x Height (in)	34″ x 34″ x 39″
Shipping
Weight (lbs)	301
Length x Width x Height (in)	37″ x 36″ x 45″
Rated in accordance with AHRI standard 1160 water temp/ambient air/relative humidity