Lo-Chlor Fast Dissolve Stabilizer - 1 lb Bag

Fast Dissolve Stabilizer ensures cost-saving, maximized results from chlorine, without the mess from typical stabilizers. Try this convenient product to stop chlorine loss in pools!

• Ensures cost-saving, effective results from your chlorine sanitizer.
• Dissolves as fast as sodium bicarbonate.
• Eliminates extra brushing and clogged filters.
• Helps maintain a continuous chlorine residual.
• Safe and effective for all chlorine types and salt water pools.
• Gentle on all pool surface types.
• Makes pool chlorine last 6-10 times longer.
• Available in convenient 1 lb. pouch.
• 1 lb. will raise 10 ppm in 10,000 gallons of water.

Directions

• Backwash or clean filter and measure cyanuric acid level.
• Chlorinate pool water to satisfy chlorine demand (2-4 ppm).
• Adjust pH of pool water to the 7.2 to 7.8 range. A pH of 7.4 is ideal for plaster pools and a pH of 7.6 is ideal for vinyl, fiberglass and painted pools.
• Through the skimmer, add Fast Dissolve Sanitizer at a rate of 2.5 to 3 pounds per 10,000 gallons. This should introduce 30 to 35 ppm of cyanuric acid.
• Alternatively, pre-dissolve required required amount (as above in step 4) of Fast Dissolve Stabilizer in a bucket of hot water and stir. Add solution to pool by pouring along perimeter.
• DO NOT backwash or clean filter for at least 48 hours.
• A cyanuric acid level of 40-60 ppm is recommended. Use a test kit specific for cyanuric acid (pool stabilizer or conditioner). Add Fast Dissolve Stabilizer until proper levels are attained and add as required throuighout the year.

Dosage

Add 2.5 to 3 pounds per 10,000 gallons of pool water.

Dosage Chart

Dosage required to introduce 30-35 ppm of Cyanuric Acid.